TM 5-6625-2691-13&P
REPAIR OF THE HOUSING
b. Cleaning and Inspection. Clean away dirt, oil film,
6-1. General
rust or any other foreign material from the unit. In-
The housing completely incloses all components and
spect the housing for dents, bends or other damage.
controls. It is a one piece unit with three hinged doors;
two doors for ventilation and one for the control panel.
c. Repair. Straighten bends, knock out dents and
The housing is easily removable.
weld any breaks in the housing. Replace an unservicea-
ble housing.
6-2. Housing
d. Installation. Refer to figure 5-2 and install the
a. Removal. Refer to figure 5-2 and remove the hous-
housing.
ing.