TM 5-6625-2691-13&P
Figure 5-1. Rectifier removal and installation.
Table 5-1. Troubleshooting (Cont'd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b . Installation. Using figure 5-1 as a guide, install the rectifier as follows:
( 1 ) Install the mounting screws (4), flatwashers (8) and lockwashers (4).
( 2 ) Connect all wires and remove tags.
Section III. GENERAL MAINTENANCE
The maintenance to be performed by direct support
repair of the housing which shall be accomplished by
maintenance personnel on this equipment is limited
knocking out dents and straightening bends.