TM 5-6350-275-24&P
3-130. REMOVE AND REPLACE RADIO FREQUENCY LINK.
Due to specialized requirements for the equipment and the unit's accessibility, refer to the SAIG to determine proper
trouble-shooting, removal and replacement procedures.
3-131. STARPIN KEYPAD OPERATION.
a. Perform the following maintenance procedures to self test, walk test, or shunt zone sensors as necessary.
StarPin keypad abbreviations are as follows:
BEL
Bell Test
ACC
Access
AUD
Audible
CLR
Clear
CMD
Command
DIS
Display
EXT
Extended Hours
MTC
Maintenance Mode
PER
Perimeter Sensor
SEC
Secure
SLF
Self Test
SNT
Shunt Sensor
TST
Test Mode
24H
24 Hour Sensor
WLK
Walk Test
ZNE
Zone
b. The Stargate alarm zone keypads operate as access/secure initiating devices for their specific alarm zones of the
Stargate remote. In addition, you can use the keypad to review the status of the sensors within the zone, extend the
normal working hours of the zone, and initiate duress codes and sensor tests. The following figure illustrates the
keypad layout and the LCD readout.
Figure 3-73. Starpin Keypad
3-238