TM 5-6350-275-24&P
3-102. REPLACE VIDEO SWITCHER (Figure 3-54).
This task consists of:
a. Remove
b. Install
INITIAL SETUP:
General Safety Instructions:
Materials/Parts:
Remove all jewelry while working on
Video Switcher
equipment.
Equipment Condition:
All PWAs removed (Ref. 3-103)
WARNING
Shut off power source before attempting to disconnect, service, or connect wires or cables.
Failure to do so may result in serious injury or death.
a. Removal
(1) Disconnect ac power cord (3) from power source and video switcher (1).
(2) Tag and remove all cables from video switcher rear panel (2).
(3) Remove video switcher from console or cabinet.
b. Installation
(1) Place video switcher (1) in console or cabinet.
(2) Connect tagged cables to rear panel (2).
(3) Connect ac power cord (3) to video switcher and power source.
Figure 3-54. Video Switch Assembly
3-197
