TM 5-6350-275-24&P
3-107. REPLACE 12 V BATTERY. (Figure 3-55).
This task consists of:
a. Remove
b. Install
INITIAL SETUP:
Materials/Parts:
General Safety Instructions:
12 v battery, 4 AH (2ea)
Remove all jewelry while working on
equipment.
WARNING
Shut off power source before attempting to disconnect, service, or connect wires or
cables. Failure to do so may result in serious injury or death.
a. Removal
(1) Open and remove front access cover from IAC enclosure.
(2) Remove AC adapter (3) from power receptacle (4).
(3) Remove red and black slip on terminal lugs from positive and negative terminals of 12 v battery or batteries (5).
(4) Remove battery or batteries from enclosure.
b. Installation
(1) Place 12 v battery or batteries (5) into enclosure.
(2) Connect red and black slip on terminal lugs to positive and negative terminals of 12 v battery or batteries (5).
(3) Connect AC adapter (3) to power receptacle (4).
(4) Place front access cover on IAC enclosure and secure.
3-202