Section VI. PREPARATION FOR STORAGE OR SHIPMENT

TM 11-6625-2884-12/ NAVAIR 16-35TS3615-1

SECTION VI

PREPARATION FOR STORAGE OR SHIPMENT

PACKING BTS

3-13.

The BTS is normally shipped in its own combination case.

WARNING

A minimum of four persons must be used in handl-

ing or lifting the Test Set, Countermeasures Set

TS-3615/ALQ-136(V).

Extreme care must be used

in handling, to prevent injury to persons or

damage to equipment.

To prepare the BTS for storage or movement:

Shut it down in accordance with paragraph 2-13.

Disconnect cables and air hose from the side connector panel (para 3-7).

c. Secure cover plates on side connector and top blower panels.

d. Pack all associated manuals, cables, and accessories in the BTS front

Close and fasten front and rear covers; the BTS is now ready for move-

ment.

PLACING BTS BACK IN SERVICE

3-14.

To place the BTS back in service after storage or movement:

WARNING

A minimum of four persons must be used in handling

or lifting the BTS. Extreme care must be used to

prevent injury to persons or damage to equipment.

a. Press the air relief valve on the side of the case and remove front

cover.

Remove cables, accessories, and technical manuals from the cover.

c. Loosen fasteners and open cover plates from side connector panel and top

blower panel (see para 3-7).

d. Connect test cables and air duct to the side connector panel in

accordance with paragraph 3-7; the BTS is now ready for use.