INSTALLATION INSTRUCTIONS

TM 11-6625-2884-1 2/NAVAIR 16-35TS3615-1

INSTALLATION INSTRUCTIONS

3-6. The followi ng paragraphs describe bench requirements, cable, air duct

connections, and ac power requirements of the BTS. Use a bench at least 30 x

72 inches, capabl e of supporting weight of 500 pounds.

WARNING

Hiqh voltaqe is used in the operation of this

equipment. Avoid contacting high-voltage con-

nections when installing or operating this equip-

ment. Injury or death may result if personnel

fail to observe safety precautions.

CAUTION

Top cover must be open to exhaust cooling air

whenever BTS is in operation. Blower hose must

be securely connected from CM set to BTS whenever

CM set is tested.

CONNECTIONS

3-7. On top of BTS, using flat blade screwdriver loosen five captive screws

and open hinged cover to front of set; on upper left side of BTS loosen five

captive screws and open cover downward, exposing air hose plenum and cable

connections.

3-4