INITIAL ADJUSTMENT

TM 11-6625-2884-12/NAVAIR 16-35TS3615-1

PRELIMINARY BTS STARTING PROCEDURE (Continued)

c. Check that the POWER indicator on the CONTROL PANEL ASSEMBLY, STATUS

PANEL ASSEMBLY, and on each (1A3/1A4) RF MODULATION ASSEMBLY lights. If the

POWER indicator lights for each of the four assemblies, the required 115 V

power is present. If any of the four assembly indicators do not light, check

that the respective 115 VAC circuit breaker is energized.

INITIAL ADJUSTMENT

2-10. Refer to the appropriate UUT test procedures for initial settings of the

BTS. Normally, no adjustment is required prior to operation.