TM 5-6350-275-24&P
3-95.
REPLACE CLOSED CIRCUIT TV MONITOR. (See Figure 3-48).
This task consists of:
a. Remove
b. Install
INITIAL SETUP
General Safety Instructions:
Materials/Parts:
Remove all jewelry while working on
CCTV Monitor
equipment.
Wear ESD wriststrap while working on
equipment.
WARNING
Shut off power source before attempting to disconnect, service, or connect wires or cables.
Failure to do so may result in serious injury or death.
a. Removal
(1) Press power on/off switch (1) to remove power to monitor (2).
(2) Disconnect input ac power cord (4) from terminal power source.
(3) Tag and remove video in and video out coaxial cables (3) from rear of TV monitor (2).
(4) Remove monitor from CCTV console (5).
b. Installation
(1) Place monitor (2) on CCTV console (5).
(2) Connect tagged coaxial cable to video input and video output jacks (3).
(3) Connect ac input power cord (4) to terminal strip.
(4) Press power on/off switch (1) to apply power to monitor. Power on/off lamp should illuminate.
3-185