TM 5-6350-275-24&P
3-21. REPLACE VIDEO GRAPHICS ADAPTER. (Figure 3-31)
This task consists of:
a. Remove
b. Install
INITIAL SETUP:
Equipment Condition:
General Safety Instructions:
Color monitor power off
Remove all jewelry while working on
Materials/Parts:
equipment.
Video Graphics Adaptor
WARNING
Shut off power source before attempting to disconnect, service, or connect wires or cables. Failure to do
so may result in serious injury or death.
a.
Removal
(1) Remove keyboard cable (7) from VGA adapter (9).
(2) Loosen the two captive screws on video graphics cable (10) and color monitor video cable (5) and remove from
cables from VGA adapter (9).
b.
Installation
(1) Connect and secure video graphics cable (10) and color monitor video cable (5) to VGA adapter (9) with the two
captive screws on each cable.
(2) Connect keyboard cable (7) to VGA adapter (9) by inserting connector into VGA adapter jack until cable
connector locks into place.
3-22. REPLACE POWER MODULE.(Refer to paragraph 3-13 and Figure 3-28.)
3-93