CONNECTION OF JUMPER BETWEEN PINS ON J7 CONNECTOR

TM 11-7010-201-12/ET821-AA-OMl-010/E154 MTS/TO 31S5-2TSQ73-1

Section IV. MAINTENANCE PROCEDURES

5-19. INTRODUCTION.

This section contains the removal and replacement

(Refer to Maintenance Allocation Chart (MAC) in

procedures done by organizational maintenance.

High voltage is used in the MTS. Death on contact may result if personnel fail to

observe safety precautions.

Before working on the MTS, turn off power and ground points of high potential before

touching them.