 |
|||
|
|
|||
|
Page Title:
OVERVOLTAGE PROTECTION CIRCUIT REMOVAL AND REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 11-6625-2885-30/NAVAIR 16-35TS3614-2
OVERVOLTAGE PROTECTION CIRCUIT REMOVAL AND REPLACEMENT
To remove the overvoltage protection circuit:
a. Removal .
(1) Remove the video front panel assembly (1) in accordance with
(2) Remove both circuit cards (2) in accordance with paragraph 3-23a.
(3) Mark and unsolder wires (3) going to the overvoltage protection
circuit 1A20V1 assembly (4).- -
(4) Remove two retaining screws and washers (5) from the video front
panel assembly.
b.
Replacement. To replace the overvoltage protect on circuit:
(1) Place the overvoltage protection circuit OV1 assembly (4) in
its proper location-and secure to the video front panel assembly
with two screws and washers (5).
(2) Solder marked wires (3) to the overvoltage protection circuit.
(3) Replace the circuit cards (2) in accordance with paragraph 3-23b.
(4) Replace the video front panel assembly (1) in accordance with
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals