CIRCUIT CARD REMOVAL AND REPLACEMENT - TM-11-6625-2885-300104

TM 11-6625-2885-30/NAVAIR 16-35TS3614-2

CIRCUIT CARD REMOVAL AND REPLACEMENT

3-23.

Removal . Unfasten the 10 captive retaining screws (1) on the front of

the video assembly.

Remove front panel assembly from its case. Be careful not to break any

of the wires which connect front panel to case. Set front panel face

down as illustrated.

Unfasten 4 screws (2) on circuit card retaining cover (3), and remove

cover to expose circuit cards (4).

Remove circuit card (4) by pulling it from its enclosure.

b. Replacement. Place circuit card (4) in its proper slot, push card into

enclosure, and mate card edge connector fully.

Replace retaining cover (3) and secure with 4 screws (2).

Replace front panel assembly in its case. Fasten 10 captive screws (l).