Removal of Control Panel Assembly lA1.

TM 11-6625-2884-30/NAVAIR 16-35TS3815-2

CAUTION

When connecting or disconnecting jack screw

connectors:

Turn one screw one turn.

Turn other screw one turn.

Repeat alternate turning of screws.

Do not use excessive torque.

Turning one screw too far or using excessive

torque may crack connector body or strip

screw thread!

For removal of the control panel,

Removal of Control Panel Assembly lA1.

perform the followlng procedure:

(2) Remove 115 Vac and 28 Vdc input power to the BTS Connector Panel

Jacks J5 and J6.

(3) From the rear of the BTS, disconnect cable P4 from 1A2 J10 on Status

Panel 1A2 and Cable P2 from lAIJ1 on the control panel.

3-77