Removal of Control Panel Assembly lA1. (CONT)

TM 11-6625-2884-30/NAVAIR 16-35TS3615-2

(4) Make sure that air hose and all connectors are disconnected from BTS.

(5) Close hinged cover (1) over BTS side connector panel.

(6) Lay BTS down (2) on hinged cover side. Close latches on side of BTS.

(1) Remove four screws holding Control Panel Assembly 1A1 to BTS.

Control Panel Assembly 1A1 is wired to BTS. Be careful

not to pull or twist wires while handling 1A1.

Rotate 1A1 and set it in

(8) Pull Control Panel Assemb ly 1A1 forward.

front of BTS.

3-78