|
| |
TM 1-6625-736-13&P
Figure 2-3. CADU Start-Up Selection Menu
(d)
Select option 2, "Set up for host communication".
(e)
From the PC main menu, select "Load Data or Aircraft Setup File from PC to CADU".
(f)
Install INITCAL program from the INITCAL diskette (P/N 29304200). When prompted for a file name enter:
INITCAL. CMD. EX: Initial. CMD.
(g)
When the system has completed transferring files, the message "Press any key. . . ' will appear. Press any key
on the PC to return to the main menu and select QUIT from the available options to re-boot the CADU. When
the re-booting process is completed you will be returned to the main menu on the PC. Select EXIT to end the
program and return to the DOS prompt.
(h)
On the CADU, select option 1. This will place the CADU in the Operational Mode. Allow the CADU to stabilize,
then disconnect from the computer and continue with SETUP.
(2) SETUP
Establish connections between the DAU, CADU, Electronic Test Set, and external power as follows:
CAUTION
Install all cables prior to turning on external power.
NOTE
Calibration of the DAU will be conducted in a two part process. Test States 1 : XX_1 will test ACC
ports 1 and 2. Test States 1 :XX_2 will test ACC ports 3 and 4. Procedures for each process is
identical.
Change 1
2-7
|
