FINAL PROCEDURES.

TM 1-6625-735-14

Install and fasten test set in its case.

If ROLL ATT control does not indicate

180 (within plus or minus one minor division on the

In accordance with DA PAM 738-750, make

outer dial), loosen Allen screws and align as required.

and attach label as appropriate.

5.27.

FINAL PROCEDURES.

(1)

DA Label 80 (US Army Calibrated Instrument)

NOTE

for complete calibration.

It may be necessary to compromise

(2)

DA Label 163 (US Army Limited Special Cali-

adjustment of ROLL ATT synchro

bration).

transmitter in order to obtain in toler-

(3)

DA Form 2417 (US Army Calibration System

ance indications at 0 and 180.

Rejected Instrument).

Turn off bench power to test set and disconnect

other equipment.

Table 5-1.

Calibration Description.

Test Set Parameters

Performance Specifications

Accuracy: 6 0.15 vdc

Power Supply

Range: 15.0 vdc

Range: -15.0 vdc Accuracy: 6 0.15 vdc

NO. 1 SCALING AMP simulator

Range: -10.27 to 10.27 vdc

Accuracy: 6 0.4 vdc

NO. 2 SCALING AMP simulator

Range: -10.27 to 10.27 vdc

Accuracy: 6 0.4 vdc

CLTV STICK POSN indicator

Range: -7.16 to 7.16 vdc

Accuracy: 6 0.74 vdc

AS SENSOR simulator

Range: 0 to 12.2 vdc

Accuracy: 6 0.15 vdc at 0 vdc, 6 1.25 vdc at 12.2 vdc

Range: 13.6 vdc Accuracy: 6 1.5 vdc

ACTR POSN simulator

Range: -13.5 vdc Accuracy: 61.5 vdc

PITCH RATE GYRO simulator

Range: -5.17 to 5.17 vdc

Accuracy:6 0.53 vdc

LATL ACCLRM simulator

Range: -3.96 to 3.96 vdc

Accuracy: 60.41 vdc

YAW RATE simulator

Range: -1.35 to 1.35 vdc

Accuracy: 6 0.3 vdc

ROLL ATT simulator

Range: 0 to 360 at selected intervals

Accuracy: 6 0.2 (see Table 4)

5-71