Table 2-1. Operator's Controls. (cont)

TM 1-6625-735-14

Table 2-1.

Operator's Controls. (Cont)

CONTROL, INDICA-

TOR, TEST POINT, OR

CONNECTOR

FUNCTION

STAB 1 SIM Test Point

Provides monitoring capability for No. 1 lateral accelerometer simulation sig-

nal when mode selector control is at SIM STAB 1 & 2 or SIM STAB 1. Pro-

vides monitoring capability for ground supplied to No. 1 stabilator amplifier

when mode selector control is at GND or SIM SAS 1. When mode selector

control is at NORM or SIM STAB 2, STAB 1 SIM test point is connected to

STAB 1 SNSR test point to provide monitoring capability for signal output

from No. 1 lateral accelerometer.

STAB 2 SNSR Test Point

Provides monitoring capability for signal output of No. 2 lateral accelerometer.

When mode selector control is at NORM or SIM STAB 1, STAB 2 SNSR test

point is connected to STAB 2 SIM test point.

STAB 2 SIM Test Point

Provides monitoring capability for No. 2 lateral accelerometer simulation sig-

nal when mode selector control is at SIM STAB 1 & 2 or SIM STAB 2. Pro-

vides monitoring capability for ground supplied to No. 2 stabilator amplifier

when mode selector control is at GND or SIM SAS 1. When mode selector

control is at NORM or SIM STAB 1, STAB 2 SIM test point is connected to

STAB 2 SNSR test point to provide monitoring capability for signal output

from No. 2 lateral accelerometer.

SAS SNSR Test Point

Provides monitoring capability for filtered lateral accelerometer output signal

from No. 1 stabilator amplifier. When mode selector control is at NORM or

SIM STAB 1, SAS SNSR test point is connected to SAS SIM test point.

SAS SIM Test Point

Provides monitoring capability for filtered lateral accelerometer simulation sig-

nal when mode selector control is at SIM SAS 1. Provides monitoring capabil-

ity for ground supplied to SAS amplifier when mode selector control is at

GND, SIM STAB 1 & 2, and SIM STAB 2. When mode selector control is at

NORM or SIM STAB 1, SAS SIM test point is connected to SAS SNSR test

point to provide monitoring capability for filtered lateral accelerometer output

signal from No. 1 stabilator amplifier.

L/R Control

Supplies variable dc simulation signal through selected SIM position of mode

selector control to specific amplifiers selected. Simulation voltages, which are

selected by mode selector control and supplied through test set connector J1 to

No. 1 stabilator amplifier, can be monitored at STAB 1 SIM test point. Simu-

lation voltages, which are selected by mode selector control and supplied

through test set connector J2 to No. 2 stabilator amplifier, can be monitored at

STAB 2 SIM test point. Simulation voltages, which are selected by mode

selector control and supplied through test set connector J3 to SAS amplifier,

can be monitored at SAS SIM test point. Simulation voltages supplied to No. 1

and No. 2 stabilator amplifiers are within voltage range of -3.75 vdc to 3.75

vdc. From 0 vdc reference, turning control L supplies positive voltage output

from test set to No. 1 and No. 2 stabilator amplifiers, and turning control R

supplies negative voltage output from test set to No. 1 and No. 2 stabilator

amplifiers. Simulation voltages supplied to SAS amplifier are within voltage

range of -3.0 vdc to 3.0 vdc. From 0 vdc reference, turning control L supplies

negative voltage output from test set to SAS amplifier and turning control R

supplies positive voltage output from test set to SAS amplifier.

2-16