Table 2-1. Operator's Controls. (cont)

TM 1-6625-735-14

Table 2-1.

Operator's Controls. (Cont)

CONTROL, INDICA-

TOR, TEST POINT, OR

CONNECTOR

FUNCTION

Mode Selector Control

NORM supplies No. 1 and No. 2 lateral accelerometer signals through test set

connectors J1 and J2 to No. 1 and No. 2 stabilator amplifiers, respectively.

NORM also supplies filtered lateral accelerometer signal from No. 1 stabilator

amplifier through test set connector J3 to SAS amplifier. Signal from No. 1

lateral accelerometer can be monitored at STAB 1 SNSR and STAB 1 SIM

test points. Signal from No. 2 lateral accelerometer can be monitored at STAB

2 SNSR and STAB 2 SIM test points. Signal from No. 1 stabilator amplifier

can be monitored at SAS SNSR and SAS SIM test points. GND supplies

ground from test set through connectors J1, J2, and J3 to No. 1 stabilator

amplifier, No. 2 stabilator amplifier, and SAS amplifier, respectively. These

grounds can be monitored at STAB 1 SIM, STAB 2 SIM, and SAS SIM test

points. SIM STAB 1 & 2 supplies variable dc simulation signal selected by

L/R control through test set connectors J1 and J2, to No. 1 and No. 2 stabilator

amplifiers, respectively. These simulation signals can be monitored at STAB 1

SIM and STAB 2 SIM test points. This position also supplies a ground

through test set connector J3 to SAS amplifier. This ground can be monitored

at SAS SIM test point. SIM STAB 1 supplies variable dc simulation signal

selected by L/R control through test set connector J1 to No. 1 stabilator ampli-

fier. This simulation signal can be monitored at STAB 1 SIM test point. SIM

STAB 1 also supplies No. 2 lateral accelerometer signal through test set con-

nector J2 to No. 2 stabilator amplifier. This accelerometer signal can be moni-

tored at SIM STAB 2 test point. SIM STAB 1 also supplies filtered lateral

accelerometer signal from No. 1 stabilator amplifier through test set connector

J3 to SAS amplifier. This filtered accelerometer signal can be monitored at

SAS SIM test point. SIM STAB 2 supplies variable dc simulation signal

selected by L/R control through test set connector J2 to No. 2 stabilator ampli-

fier. This simulation signal can be monitored at STAB 2 SIM test point. SIM

STAB 2 also supplies No. 1 lateral accelerometer signal through test set con-

nector J1, to No. 1 stabilator amplifier. This accelerometer signal can be moni-

tored at STAB 1 SIM test point. SIM STAB 2 also supplies ground from test

set through connector J3 to SAS amplifier. This ground can be monitored at

SAS SIM test point. SIM SAS 1 supplies variable dc simulation signal selected

by L/R control through test set connector J3 to SAS amplifier. This simulation

signal can be monitored at SAS SIM test point. SIM SAS 1 also supplies

ground from test set through connectors J1 and J2 to No. 1 and No. 2 stabila-

tor amplifiers, respectively. These grounds can be monitored at STAB 1 SIM

and STAB 2 SIM test points.

PITCH RATE GYRO

Provides capability for simulating or monitoring No. 1 and/or No. 2 stabilator

Simulator

amplifiers-pitch rate gyro output signals. This simulation signal is used for test-

ing No. 1 and No. 2 stabilator amplifier-pitch rate path. Also provides capabil-

ity for simulating or monitoring No. 1 stabilator amplifier-filtered pitch rate

output signal. This simulation signal is used for testing stability augmentation

system (SAS) amplifier-pitch rate path.

2-17