Table 2-1. Operator's Controls. (cont)

TM 1-6625-735-14

Table 2-1.

Operator's Controls. (Cont)

CONTROL, INDICA-

TOR, TEST POINT, OR

CONNECTOR

FUNCTION

NO. 2 Mode Select

NORM supplies output signal from scaling amplifier in No. 2 stabilator ampli-

Control

fier through test set connector J2 to driver logic module in No. 2 stabilator

amplifier. This signal can be monitored at NO. 2 SIM and NO. 2 SNSR test

points. GND supplies ground from test set through connector J2 to input of

driver logic module in No. 2 stabilator amplifier. This ground can be moni-

tored at NO. 2 SIM test points. SIM supplies variable dc simulator signal

selected by NO. 2 DN/UP control through test set connector J2 to driver logic

module in No. 2 stabilator amplifier. This signal can be monitored at NO. 2

SIM test point.

STAB 1 & 2/SINGLE

STAB 1 & 2 supplies variable dc simulation signal selected by NO. 1 DN/UP

Control

control through SIM of NO. 1 and NO. 2 mode selector controls and through

test set connectors J1 and J2 to driver logic module in No. 1 and No. 2 stabila-

tor amplifiers. This signal can be monitored at NO. 1 and NO. 2 SIM test

points. SINGLE supplies variable dc simulation signal selected by NO. 2

DN/UP control, through SIM of NO. 2 mode selector control, and through test

set connector J2 to driver logic module in No. 2 stabilator amplifier. This sig-

nal can be monitored at NO. 2 SIM test point.

CLTV STICK POSN

Provides capability for simulating or monitoring signal output from No. 1

Simulator

and/or No. 2 collective stick position sensors. Used for testing collective func-

tion of No. 1 and No. 2 stabilator amplifiers.

NO. 1 SNSR Test Point

Provides monitoring capability for signal output of No. 1 collective stick posi-

tion sensor. When mode selector control is at NORM, NO. 1 SNSR test point

is connected to NO. 1 SIM test point.

NO. 1 SIM Test Point

Provides monitoring capability for No. 1 collective stick position sensor simu-

lation signal when mode selector control is at SIM STAB 1 & 2 or SIM STAB

1. Provides monitoring capability for ground supplied to No. 1 stabilator

amplifier when mode selector control is at GND or SIM STAB 2. When mode

selector control is at NORM, NO. 1 SIM test point is connected to NO. 1

SNSR test point to provide monitoring capability for signal output of No. 1

collective stick position sensor.

NO. 2 SNSR Test Point

Provides monitoring capability for signal output of No. 2 collective stick posi-

tion sensor. When mode selector control is at NORM, NO. 2 SIM test point is

connected to NO. 2 SNSR test point.

NO. 2 SIM Test Point

Provides monitoring capability for No. 2 collective stick position sensor simu-

lation signal when mode selector control is at SIM STAB 1 & 2 or SIM STAB

2. Provides monitoring capability for ground supplied to No. 2 stabilator

amplifier when mode selector control is at GND or SIM STAB 1. When mode

selector is at NORM, NO. 2 SIM test point is connected to NO. 2 SNSR test

point to provide monitoring capability for signal output of No. 2 collective

stick position sensor.

2-11