|
| |
TM 55-6695-220-13&P
3-13.
PANEL ASSEMBLY - INSPECT/REPAIR. (Contd)
3-13
2. REPAIR.
a.
Repair broken wire on panel assembly by resoldering loose end.
b.
Cut out section of wire with frayed insulation or replace.
3. REPLACE.
a. Removal.
(1) Remove instrument panel from case following steps in 1-a. and 1-b.
(2) Use small crescent wrench to remove panel nuts securing switches and potentiometers.
(3) Use small screwdriver to remove two screws securing temperature switch to panel.
b. Installation.
(1) Secure temperature switch in new panel using two screws.
(2) Secure switches and potentiometers in panel by passing bushing through panel hole and applying nut using
small wrench.
(3) Secure panel in case using eight screws and medium screwdriver.
END OF TASK
3-23
|
