CHAPTER 2. OPERATING INSTRUCTIONS - TM-55-4920-430-130037

TM 55-4920-430-13

CHAPTER 2

O P E R A T I N G INSTRUCTIONS

SECTION I PREPARATION FOR USE

2-1. Unpacking the Equipment.

a. Packaging Data. When packed for shipment, the AFCS bench test set is cushioned with styrofoam

and placed in a cleated plywood box. (See fig. 2-1.)

b. Removing Contents.

(1) Use the nailpuller to remove the nails from the cleated plywood cover and remove the cover.

(2) Use the nailpuller to remove the nails from one side panel of the box and remove the side

panel.

(3) Remove the top and side pads of cushioning material.

The test set weighs about 90 pounds, Be careful when lifting the test

set to prevent personal injury.

(4) Remove the test set from the box.

2-2. Checking Unpacked Equipment.

a. Inspect the equipment for damage. If the equipment has been damaged, report the damage as

specified in para 1-3.

b. Check that the equipment is complete, as listed on the packing list. Report discrepancies in accor-

dance with para 1-3.

If the equipment has been used or is reconditioned, see if it has been changed by a Modification

Work Order (MWO). If the equipment has been modified, the MWO number shall appear on the cover

near the nameplate. If modified, check that operational changes resulting from the modification are in-

eluded in the equipment manual.

NOTE

Current MWO applicable to the equipment are listed in DA PAM 310-1.

2-1

Change 1