Section Ill. INSTALLATION INSTRUCTIONS

ARMY TM 5-6675-309-14

MARINE CORPS TM 08840A-14/1

Section Ill. INSTALLATION INSTRUCTIONS

Remove PSTS from transit case.

2-5. Installation Instructions.

Raise cover to gain access to front panel of

PSTS.

Examine humidity indicator; if humidity indica-

tor is out of safe tolerance limits, notify person-

nel in charge.

Ensure pressure relief valve has been re-

Remove cable assemblies from transit case as

leased before removing cover from transit

required.

case.

Perform complete test and adjustment sequence

Refer to figure 2-1 and press pressure relief valve

in accordance with table 8-5.

on transit case cover.

Section IV. PRELIMINARY ADJUSTMENT OF EQUIPMENT

2-6. General. Preliminary adjustment of the PSTS con-

sists of performing the test and adjustment procedures

described in table 8-5.