Table 3-2. Troubleshooting

TM 6625-2691-13&P

3-6. Troubleshooting

test set or its components. You should perform the

tests/inspections and corrective actions in the order

Table 3-2 lists the common malfunctions that you

listed.

may find during the operation or maintenance of the

Table 3-2. Troubleshooting

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

NOTE

Before you use this table, be sure you have performed all normal operational checks. If you have a malfunction which is not listed

in this table, notify the next higher level of maintenance.

1. TEST SET FAILS TO START

Step 1. Inspect for a defective fuse by removing the three holder caps (fig. 3-l). Turn the caps counterclockwise, and pull the fuses out.

Inspect the fuses for burns, cracks or breaks.

Replace the fuse with a fuse of the same rating and size. Replace fuse holder cap by screwing full clockwise

until snug. Do not overtighten.

3-2