Section VI. WIRE LISTS - TM-11-7010-201-40-50058

TM 11-7010-201-40-5/ET821-AA-MMI-050/E154 MTS/T O 31S5-2TSQ73-2-5

Section VI. WIRE LISTS

5-28.

Introduction. This section contains wire lists for the MTS test aid. Two wire lists are provided; the MTS test

aid assembly wire list and the MTS test aid circuit board assembly wire list. The MTS test aid assembly wire list (table 5-

5) contains interconnecting wiring data between the connector, front panel (figure 5-3), and circuit board assembly, and is

arranged in the order of connector and pin number sequence. The MTS test aid circuit board assembly wire list (table 5-

6) contains pin-to-pin wiring for the circuit board assembly, and is arranged in the order of signal designations which are

given in alphanumeric sequence. Wire list entries are explained in paragraph 5-29.

5-29.

Wire List Column Identification. Entries for each column of the wire lists are explained in the following

paragraphs.

PREFIX. Not used.

b. CONNECTOR. Any type of terminating point, plug, receptacle, or component. Entries in table 5-6 indicate the

integrated circuit on the circuit board assembly. For example,

A01

B 09

IC number (9)

Group (B)

Circuit board reference designator

PIN. Exact terminating point of the respective connector.

SH-FIG. Not used.

WIRE MULTIGROUP. Not used.

WIRE CODE. Three-digit code for wire type and gauge.

WIRE COLOR. Standard RETMA color code.

WIRE IDENT. Not used.

SLEEVE. Not used.

SPC INST. Not used.

SIGNAL. Alphanumeric signal name or mnemonic which identifies each specific function.

STRING SEQ. NO. Not used.

SIGNAL DESCRIPTION. Description or name of a signal voltage.

5-26