|
|
TM 11-7010-201-40-1/ET821-AA-MMI-010/E154 MTS/TO 31S5-2TSQ73-2-1
Figure 3-9. Cable Assembly W556 Location
(5) Press retainer detents on card retainers on both digital card racks (bays 1 and 2) and push to one side.
(6) Using card extractor, carefully remove cable assembly printed wiring boards from digital card racks.
(7) Remove cable assembly W556 from MTS.
b. Replacement. Replace cable assembly W556 as follows:
(1) Slide cable assembly printed wiring boards into card guides and insert in connector slots in digital card racks
(refer to table 3-7).
(2) Slide card retainers back to original position until retainer detent locks.
(3) Carefully push loops of cable assemblies W552, W553, and W554 into recess between front panel and
frame assembly.
3-24
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |