|
|
TM 11-6625-467-122
Figure 2-.2 Primary power input connections.
a. 115-Volt Operation. Connect the equipment for
(2) Remove the front panel from the cabinet.
115-volt operation as follows:
(3) Connect plug PI to 115V jack J30 on the
(1) fimove the 16 screws around the edge of
rear of the front panel.
the test set that secure the front panel.
(4) Replace the front panel into the cabinet.
(5) Replace the 16 screws.
CAUTION
b. 230-Volt Operation. Connect the equipment for
Remove the panel carefully: the front
230-volt operation as follows:
panel and cabinet are joined by an in-
terconnecting cable.
2-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |