REMOVAL - TM-11-6625-2975-400087

TM 11-6625-2975-40

2-39. FRONT PANEL PUSHBUTTON SWITCH REPLACEMENT. (CONT)

REMOVAL

NOTE

Steps given are typical for all switches.

When replacing ENTER or CLEAR switches, switch actuating lens must be removed first.

1. Remove two screws (1), Iockwashers (2), and bracket (3).

2. Remove eight screws (4) from circuit board (5).

EL9LY049

3. Remove switch-retaining screw (6).

4. Unsolder switch pins (7) from circuit board (5).

5. Raise circuit board (5) and remove switch (8).

INSTALLATION

NOTE

Steps given are typical for all switches.

When performing next step, switch pins must pass through circuit board.

1. Position switch (8) on circuit board (5) and push into place.

2. Install switch-retaining screw (6).

3. Solder switch pins (7) to circuit board (5).

2-63