VOR RADIAL SELECTION AND ADJUSTMENT (cont)

TM 11-6625-2975-12

24. OPERATING PROCEDURES. (CONT)

EL9LX033

7. Press ENTER key.

NOTE

The following step increases VOR radial to 030.00.

8. Press and hold STEP ∆ RDL ∆ DDM key until RDL/DDM/MOD display changes from 000.00 to

030.00.

NOTE

Each time STEP ∆ RDL ∆ DDM key is pressed, VOR radial will increase in X)-degree

steps.

Holding STEP ∆ RDL ∆ DDM key depressed does not provide continuous 30-degree step

increases.

The following step increases VOR radial by 10 degrees.

9. Press and hold + 10 STEP key until RDl/DDM/MOD display increases by 10 degrees.

NOTE

Each time + 10OSTEP key is pressed, VOR radial will increase in 10-degree steps.

Holding + 10 STEP key depressed does not provide continuous lo-degree step

increases.

2-25