Chapter 1. INTRODUCTION - TM-11-6625-2937-130005

TM 11-6625-2937-13

CHAPTER 1

INTRODUCTION

Section I. GENERAL INFORMATION

1-1.

Scope

1-4.

Reporting

Equipment

Improvement

This manual contains detailed instructions for operator's,

Recommendations (EIR)

organizational and direct support maintenance of Test

If your equipment needs improvement, let us know.

Set, Electronic Systems ANIUKM-5 (test set group) and

Send us an EIR. You, the user, are the only one who

Adapter, Test MX-10062/U (analog test adapter). The

can tell us what you don't like about your equipment. Let

test set group includes Test Set, Electronic Systems

us know why you don't like the design. Tell us why a

AN/UKM-4 (data link tester) and Test Set, Electronic

procedure is hard to perform. Put it on an SF 368

Systems AN/UYM-7 (digital tester).

Information

(Quality Deficiency Report). Mail it to Commander, US

pertaining to the digital tester is contained in TM 11-

Army Communications and Electronics Materiel

6625-2951-13 and is repeated in this manual only to the

Readiness Command, ATTN: DRSEL-ME-MQ, Fort

extent necessary to define the relationship of the two test

Monmouth, New Jersey 07703. We'll send you a reply.

sets and to eliminate excessive cross-referencing.

1-5.

Destruction of Army Materiel to Prevent

1-2.

Indexes of Publications

Enemy Use

a. DA Pam 3104. Refer to the latest issue of

Destruction of Army electronics materiel to prevent

DA Pam 310-4 to determine whether there are new

enemy use shall be in accordance with TM 750-244-2.

editions, changes, or additional publications pertaining to

1-6.

Administrative Storage

the equipment.

Administrative storage of equipment issued to and used

b. DA Pam 3107. Refer to DA Pam 310-7 to

by Army activities will have preventive maintenance

determine whether there are modification work orders

performed in accordance with the PMCS charts before

(MWO) pertaining to the equipment.

storing.

When removing the equipment from

1-3.

Maintenance Forms, Records, and Reports

administrative storage the PMCS should be performed to

a. Reports of Maintenance and Unsatisfactory

assure operational readiness.

Disassembly and

Equipment.

Department of the Army forms and

repacking of equipment for shipment or limited storage

procedures used for equipment maintenance will be

are covered in paragraph 2-1.

those prescribed by TM 38-750, The Army Maintenance

1-7.

Calibration

Management System (Army). Air Force personnel will

Refer to TM 11-6625-2951-13 for digital tester calibration

use AFM 66-1 for maintenance reporting and TO-00-

procedures. Calibration procedures for the data link

35D54 for unsatisfactory equipment reporting

tester are contained in TB 11-6625-2937-35.

b. Report

Item

and

Packaging

Discrepancies. Fill out and forward SF 364 (Report of

1-8.

Hand Receipt

Discrepancy(ROD)) as prescribed in AR 735-11-2/DLAR

Hand receipts for End Item/Components of End Item

4140.55/NAVSUPINST 4440.127EIAFR 400.54/MCO

(COEI), Basic Issue Items (BB), and Additional

430.E

Authorization List (AAL) item are published in a Hand

c. Discrepancy in Shipment Report (DISREP)

Receipt Manual. The Hand Receipt Manual numerical

(SF 361). Fil out and forward Discrepancy in Shipment

designation is the same as the related Technical Manual

Report (DISREP) (SF 361) as prescribed in AR 55-

with the letters HR added to the number. These

38/NAVSUPNST 4610.33BIAFR 75-18IMCO P4610.19C

manuals are published to aid in property accountability

and DLAR 4500.15.

and are available through: Commander, US Army

Adjutant General Publication Center, ATTN: AGDL-OD,

1655 Woodson Road, SL Louis, MO 63114.

Section II. DESCRIPTION AND DATA

receiving set). At the DS level, the test set group tests

1-9.

Purpose and Use

the encoder and decoder microprocessor, as well as

a. Test Set Group. The test set group is used

standard logic and analog circuit cards, for a pass/fail

for direct support (DS) and depot maintenance of

condition. At the depot level, the test set group is used

Encoder, Video KY-865/AKT-18B (encoder) and

to isolate the cause of fire to failure or group of parts on

Decoder, Video KY-87 1 /PIQ2B (decoder). These units

the circuit card.

are components of Radar Surveillance System AN/UPD-

b. Adapter, Test MX-100621U. Analog circuit

7. The encoder is part of Transmitting Set, Radar Data

cards are checked using Adapter, Test MX-10062/U

AN/AKT-18B (data transmitting set) and the decoder is

(analog test

part of Receiving Set, Radar Data AN/TKQ-2B (data

1-1