RECEIVER OR TRANSMITTER ASSEMBLY CASE REMOVAL AND REPLACEMENT

TM 11-6625-2885-30/NAVAIR 16-35TS3614-2

RECEIVER OR TRANSMITTER ASSEMBLY CASE REMOVAL AND REPLACEMENT

3-26.

To remove the receiver or transmitter assembly case:

a. Removal .

(1) Remove any cables connected to J1 or J2 (1).

(2) Remove two screws (2) from the J1 and J2 side of the assembly.

(3) Carefully slip the assembly (3) from its case.

CAUTION

Once the assembly has been removed from its

protective case, use care to avoid damaging

or bending semirigid coaxial cables.

To replace the receiver or transmitter assembly (3)

Replacement.

In its case:

(1) Carefully

Slip

the assembly into its case.

(2) Replace two screws (2) in the J1 and J2 side of the assembly.