POWER SUPPLY ADJUSTMENTS

TM 11-6625-2885-30/NAVAIR 16-35TS3614-2

POWER SUPPLY ADJUSTMENTS

3-20.

a. Test Equipment.

Use the following test equipment to adjust the power

supplies.

TS-3615/ALQ-136(V)

BTS (1)

Power Supply (2)

PP-1104/G

AN/USM-451

Digital Multimeter (3)

CAUTION

After unfastening video front panel assembly, it

is still secured to the case by wires from the

power supplies. Remove the video front panel

assembly carefully.

b. Test Connections and Conditions.

(1) With FLTS connected as in paragraph 3-8, connect digital multimeter

to BTS status panel V MON jack.

(2) On BTS, set VOLTAGE MONITOR switch to the +28V position.

(3) Remove video front panel assembly from its case in accordance with

(4) Insure that al 1 cables are connected from Video Assembly 1A2 to

Transmitter Assembly 1A1 and Receiver Assembly 1A3.