|
|
REPLACEMENT
(1) Position replacement Power Supply (5) in status panel.
(2) Fasten power supply (5) to status panel, using four hex nuts,
Iockwashers and flat washers (4).
(3) Solder 115 Vac input wires (2) and two output wires (3) to Power
supply PSI.
(4) Adjust +12 Vdc power supply as in paragraph 3-36.
(5) Install caution plate (1), using four pan head screws, lock-
washers, and flat washers.
(6) Replace status panel in BTS as in paragraph 3-32b.
3-93
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |