|
|
b.
Measure voltage
between test points
TP1 and TP2. If
voltage is between
0.5V and 1.5V,
adjust potentio-
meter 1A3 R12 until
a dip is observed
with frequency meter
set for F1.
c.
Replace RF Modulation
Assembly 1A3.
Set FREQ SEL switch on
5.
1A3 to F2 position.
Tune the frequency meter
6.
for a dip in power and
record dial reading.
Same as step 4 except if
measured voltage is
between 4V and 6V. Adjust
potentiometer 1A3 R11 (1)
until a dip is observed
with frequency meter set
for F2.
3-21
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |