 |
|||
|
|
|||
|
Page Title:
TABLE 1-2. STATUS PANEL CONTROLS AND INDICATORS |
|
||
| ||||||||||
|
|
 TM 11-6625-2884-30/NAVAIR 16-35TS3615-2
REFERENCE
DEVICE
FUNCTION
Controls
1
115V AC 1-1/2 amp
Provides overcurrent protection to
circuit breaker CB1
the status panel.
(push to reset)
2
LAMP TEST pushbutton
Lights all STATUS SIGNAL indicators (11)
and FORCING FUNCTION indicators (4) to
(momentary) S13
test their lamps.
3
RESET pushbutton
Closes a contact to ground to control
UUT.
(momentary) S4
FORCING FUNCTIONS
4
Each pushbutton controls closure of a
alternate acting
separate contact to ground to control
pushbutton indicators
UUT. Indicator lights when contact is
S5-S12
closed.
5
INPUT RF ATTENUATOR
Controls attenuation between RF IN
0-60 dB rotary
connector (16) and VAR RF OUT connector
control AT2
(13) in 10 dB steps.
INPUT RF ATTENUATOR
6
Controls attenuation between RF IN con-
O-9 dB rotary
nector (16) and VAR RF OUT connector (13)
in 1 dB steps.
control AT1
DET VIDEO/UUT SIGNAL
7
Switches CHAN 1 connector (14) to BTS
S3
detected video in order to monitor signal
from RF IN connector (16); or switches to
UUT SIGNAL selected by black knob of
OSCILLOSCOPE MONITOR (8).
Black knob switches CHAN 1 connector (14)
8
OSCILLOSCOPE MONITOR
dual concentric
to one of 17 points in the UUT or to BTS
rotary control S1A/B
VIDEO (1A3-J9). Red knob switches CHAN 2
connector (15) to one of 17 points in the
UUT or to BTS video.
9
VOLTAGE MONITOR
Switches V MON connector (12) to one of
rotary control S2
nine voltage points in UUT. This control
also has an unmarked off position (full
CW).
1-15
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals