Section III. OPERATION UNDER UNUSUAL CONDITIONS

Section III. OPERATION UNDER UNUSUAL CONDITIONS

TM 11-5895-1097-12

may combine with dirt to form a thin insulating film on

2-8. Operation at Low Temperature

pins of the connectors. Keep the TS-3630 as dry as

The TS-3630 can be stored at - 250F without damage to

possible. Clean the connectors before plugging in the

the components. However, at such low temperature,

modules under test.

both the electrical and mechanical parts are more easily

damaged by shock and vibration. The TS-3630 should

be protected during handling against shock or excessive

2-10. Operation in Desert Climates

vibration.

If the TS-3630 must be operated in desert climates, it

should be set up in an enclosed area. Dirt or dust should

be removed by gentle shaking and light brushing with a

2-9. Operation Under Tropical Conditions

soft brush. Insure adequate circulation of air to prevent

The high relative humidity in tropical areas causes

overheating.

moisture to condense on the equipment. This moisture

2-3