|
|
TM 1-6625-735-14
c.
Connect multimeter to -15 VDC test point
and SIG GND. Multimeter shall indicate -15 6 0.15
made.
vdc.
Adjustments. Adjustments can not be
CLTV STICK POSN Simulator.
made.
a.
Connect multimeter to CLTV STICK
POSN NO. 1 SIM and NO. 1 SIG GND.
Performance Check.
b.
Place CLTV STICK POSN mode selector
a.
Connect multimeter leads to SCALING
control to SIM STAB 1 & 2.
AMP SIM NO. 1 and NO. 1 SIG GND.
c.
Rotate CLTV STICK POSN DN/UP con-
b.
Place SCALING AMP NO. 1 mode select
trol fully CCW. Multimeter shall indicate 7.16 6 0.74
control to SIM.
vdc.
c.
Place STAB 1 & 2/SINGLE control to
d.
Rotate CLTV STICK POSN DN/UP con-
SINGLE.
trol fully CW. Multimeter shall indicate -7.16 6 0.74
d.
vdc.
Rotate SCALING AMPL DN/UP NO. 1
control fully counterclockwise (CCW). Multimeter
shall indicte 10.27 6 0.4 vdc.
Adjustments. Adjustments can not be
made.
e.
Rotate SCALING AMPL DN/UP NO. 1
control fully clockwise (CW). Multimeter shall indicte
-10.27 6 0.4 vdc.
Adjustments. Adjustments can not be
made.
a.
Connect multimeter to AS SENSOR SIM
NO. 1 and NO. 1 SIG GND.
NO. 2 SCALING AMPL Simulator.
b.
Place AS SENSOR mode selector control
Performance Check.
to SIM STAB 1 & 2.
c.
a.
Rotate AS SENSOR DECR/INCR control
Connect multimeter to SCALING AMP
fully CCW. Multimeter shall indicate 0 6 0.15 vdc.
SIM NO. 2 and SIG GND.
d.
b.
Rotate AS SENSOR DECR/INCR control
Place SCALING AMP NO. 2 mode select
fully CW. Multimeter shall indicate 12.2 6 1.25 vdc.
control to SIM
e.
c.
Connect multimeter to AS SENSOR SIM
Make sure SCALING AMPL STAB 1 &
NO. 2 and NO. 2 SIG GND. Multimeter shall indicate
2/SINGLE control is in SINGLE.
12.2 6 1.25 vdc.
d.
Rotate SCALING AMPL DN/UP NO. 2
control fully CCW. Multimeter shall indicte 10.27 6
f.
Place AS SENSOR mode selector control
to SIM STAB 1. Multimeter shall indicate 2.3 6 0.1
0.4 vdc.
vdc.
e.
Rotate SCALING AMPL DN/UP NO. 2
control fully CW. Multimeter shall indicte -10.27 6
made.
0.4 vdc.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |