|
| |
TM 1-4920458-13&P
Section III. Preventive Maintenance Checks And Services (PMCS)
SECTION CONTENTS
PARA
PAGE
GENERAL
4-6
4-3
CLEANING
4-7
4-3
LUBRICATION
4-8
4-3
EXTREME ENVIRONMENTAL MAINTENANCE
4-9
4-3
CALIBRATION
4-10
4-4
4-6.
GENERAL
Inspect Pitot and Static Systems Tester for missing or damaged components. Check for physical damage such as
breaks, cracks, wear, etc.
4-7.
CLEANING
Isopropyl alcohol is flammable and toxic. Use with adequate ventilation, gloves and eye protection. Do
not use around heat, open flames or sparks.
Use a soft cloth dampened with isopropyl alcohol for cleaning. Keep equipment free of dirt and grease.
Place protective cover over the tester when not in use.
4-8.
LUBRICATION
Perform the following services before operating the Tester.
Lubricate in accordance with instructions contained in para. 3-9.
Perform the before operation services listed in the Operator's/Crew preventive maintenance checks and services table
2-1.
4-9.
EXTREME ENVIRONMENTAL MAINTENANCE
There are no requirements for extreme environmental maintenance for the Pitot and Static Systems Tester.
4-3
|
