(5) Read the meter. If the meter switch is on the
Ohms Switch Setting
Xl or RX1
Read number on scale
"RXI" or "Xl" range, the reading is taken directly
X10 or RX10
Multiply reading by 10
from the top scale. If the meter switch is on a different
Multiply reading by 100
Xl00 or RX100
XIK or RXIK
Multiply reading by 1,000
range, multiply the reading on the scale according to
X10 or RX10K
Multiply reading by 10,000
the table below.
(Remember: K = 1,000)
Figure 7-8. Reading the ohm scale.
Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668
Phone For Parts Inquiries: (727) 755-3260