INSTALLATION - TM-11-6625-2976-400097

TM 11-6625-2976-40

2-23. BATTERY CASE REPLACEMENT. (CONT)

INSTALLATION

1. Using soldering iron, solder two red wires (10)to bottom standoff (11), two black wires (8)

to center standoff (9), and two orange wires (6) to top standoff(7).

2. Apply a bead of sealant on lip (12) of battery case (5).

CAUTION

Care must be taken when performing next step to prevent pinching wires under battery

case and front panel.

NOTE

See illustration for correct location of six screws (4).

3. Position battery case (5) on front panel and Install six screws (4). Using screwdriver, tighten

screws.

4. Install two screws (l), Iockwashers (2), and nuts (3) and, using screwdriver and wrench,

tighten.

FOLLOW-ON MAINTENANCE: Install A6 and A8 assembly (para 2-19).

2-69