BATTERY CASE REPLACEMENT.

TM 11-6625-2976-40

2-23. BATTERY CASE REPLACEMENT.

MATERIALS/PARTS: Case, battery (P/N 629-0728-001)

Adhesive/sealer silicon (item 6, app B)

PRELIMINARY PROCEDURE: Remove A6 and A8 assembly (para 2-19).

REMOVAL

1. Using screwdriver and wrench, remove two screws (l), lockwashers (2), and nuts (3).

2. Using screwdriver, remove six screws (4) and move battery case (5) to side.

3. Using soldering iron, unsolder two orange wires (6) from top standoff (7), two black wires (8)

from center standoff (9), and two red wires (10) from bottom standoff (11).

4. Remove battery case (5).

NOTE

If TB1 contact board is to be replaced, see paragraph 2-24.

2-68