interconnecting the recording head assembly under test
and the SM-627/AYM-9; it is mounted on the wall of the
shielded compartment. Six cable assemblies, a camera
of a water tight, rectangular, aluminum case; Camera,
cover assembly, a cable release, and film are stored in
Still Picture KE-59A; and all cable assemblies and
the base of the CY-7117/AYM-9 under the KE-59A. The
accessories used with the SM-627/AYM-9. The case is
case cover contains Extender, Circuit Card MX-
made up of a base and cover. A pressure relief valve is
8966/AYM in a storage compartment and a welded plate
located on the base. The KE-59A consists of Polaroid
assembly cover mounted on a cover holding bracket.
Camera CU-5 and a welded plate assembly. Three lamp
The welded plate assembly cover is used for enclosing
assemblies for holding the recording head assembly
the shielded compartment when testing a recording head
under test are mounted on a turntable assembly within a
shielded compartment on the welded plate assembly.
Connector J1 is a double-sided connector used for
Figure 1 - 4.·
Case, Test Set CY-7117/AYM-9 with cover removed (Part 1 of 2).