| |
TM 55-6695-220-13&P
3-15.
PANEL CONTROLS-- INSPECT/REPLACE.
3-15
This task covers:
Inspect and Replace.
INITIAL SETUP
Personnel Required
Test Equipment
68F Aircraft Electrician
ANGSN 286
35H Calibration Repair Specialist
Tools
Equipment Condition
Aircraft Electrician's
Para. 3-13.
Tool Kit JTK-17
Condition Description
Panel Assembly removed
1. INSPECT.
Inspect faulty control for broken terminal.
2. REPLACE.
a. Removal.
(1) Unsolder leads from faulty rotary switch or potentiometer, and mark leads with tape.
(2) Use 3/8 inch open-ended wrench to unscrew hex nut on top side of panel, securing control and lockwasher.
(3) Secure replacement control with nut and lockwasher.
(4) Solder leads back onto control, observing tape markings (See Figure 3-10).
GO TO NEXT PAGE
3-26
|