 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-4920-415-13&P
Code
Application/Explanation
d. Part Number. Indicates the primary number
used by the manufacturer (individual, company, firm,
Z
Nonreparable. No repair is authorized.
corporation, or Government activity), which controls the
design and characteristics of the item by means of its
B
No repair is authorized. The item may be
engineering drawings, specifications standards and
reconditioned by adjusting, lubricating, etc., at
inspection requirements, to identify an item or range of
the user level. No parts or special tools are
items.
procured for the maintenance of this item.
NOTE
(3) Recoverability Code.
Recoverability
codes are assigned to support items to indicate the
When a stock numbered item is
disposition action on unserviceable items.
The
requisitioned, the item received
recoverability code is entered in the fifth position of the
may have a different part number
Uniform SMR Code format as follows:
than the part being replaced.
Code
Definition
e. Federal Supply Code for Manufacturer
Z
Nonreparable item.
When unserviceable,
(FSCM). The FSCM is a 5-digit numeric code listed in
condemn and dispose at the level indicated in
SB 708-42 which is used to identify the manufacturer,
position 3.
distributor, or Government agency, etc.
O
Reparable item.
When uneconomically
f. Description. Indicates the Federal item name
reparable, condemn and dispose at Aviation
and, if required, a minimum description to identify the
Unit Maintenance level.
item. Items that are included in kits and sets are listed
below the name of the kit or set with the quantity of each
F
Reparable item.
When uneconomically
item in the kit or set indicated in the quantity
reparable, condemn and dispose at the Aviation
incorporated in unit column. In the Special Tools List,
Intermediate Maintenance level.
the initial basis of issue (BOI) appears as the last line in
the entry for each special tool, special TMDE, and other
D
Reparable item. When beyond lower level
special support equipment.
When density of
repair capability, return to depot. Condemnation
equipments supported exceeds density spread indicated
and disposal not authorized below depot level.
in the basis of issue, the total authorization is increased
accordingly.
L
Item requires special handling or condemnation
g. Unit of Measure (U/M). Indicates the standard
procedures because of specific reasons (i.e.,
of the basic quantity of the listed item as used in
precious metal content, high dollar value, critical
performing the actual maintenance function.
This
material or hazardous material).
Refer to
measure is expressed by a two-character alphabetical
appropriate
manuals/directives for specific
abbreviation (e.g., ea, in., pr, etc.). When the unit of
instructions.
measure differs from the unit of issue, the lowest unit of
issue that will satisfy the required units of measure will
A
Item requires special handling or condemnation
be requisitioned.
procedures because of specific reasons (i.e.,
precious metal content, high dollar value, critical
h. Quantity Incorporated in Unit. Indicates the
material or hazardous material).
Refer to
quantity of the item used in breakout shown on the
appropriate
manuals/directives for specific
illustration figure, which is prepared for a functional
instructions.
group, subfunctional group, or an assembly. A "V"
appearing in this column in lieu of a quantity indicates
that no specific quantity is applicable (e.g., shims,
c. National Stock Number.
Indicates the
spacers, etc.).
National stock number assigned to the item and will be
used for requisitioning purposes.
C-4. Special Information. Not applicable.
C-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals