National Stock Number

TM5-6625-2694-13&P

-Reparable item. Repair, condemnation, and disposal

not authorized below depot/specialized repair activity level.

-Item requires special handling or condemnation

procedures

because of specific reasons (i.e., precious metal

content, high dollar value, critical material or hazardous

material).

Refer to appropriate

manuals/directives

for

specific instructions.

c. National Stock Number.

Indicates the National stock number

assigned to the item and which will be used for requisitioning.

Part Number.

Indicates the primary number used by the

manufacturer (individual, company, firm, corporation, or Government

activity), which controls the design and characteristics of the item

by means of its engineering drawings, specifications, standards, and

inspection requirements to identify an item or range of items.

NOTE

When a stock numbered item is requisitioned, the item received may

have a different part number than the part being replaced.

e. Federal Supply Code for Manufacturer (FSCM). The FSCM is a

5-digit numeric code listed in SB 708-42 which is used to identify

the manufacturer, distributor, or Government agency, etc.

Description.

Indicates the Federal item name and, if

required, a minimum description to identify the item. The physical

security classification of the item is indicated by the parenthetical

entry

applicable

physical

security

(insert

classification

Phy

Sec C1

e.g.

(C)-Confidential,

Phy Sec C1

abbreviation,

(S)-Secret, Phy Sec C1 (T)-Top Secret).

Items that are included in

kits and sets are listed below the name of the kit or set with the

quantity of each item in the kit or set indicated in the quantity

incorporated in unit column.

When the part to be used differs

between serial numbers of the same model,

the effective serial

numbers are shown as the last line of the description.

In the

Special Tools List, the initial basis of issue (BOI) appears as the

last line in the entry for each special tool, special TMDE, and other

special support equipment.

When density of equipments supported

exceeds density spread indicated in the basis of issue, the total

authorization is increased accordingly.

g. Unit of Measure (U/M).

Indicates the standard of the basic

quantity of the listed item as used in performing the actual

maintenance function.

This measure is expressed by a two-character

alphabetical abbreviation (e.g., ea, in, pr, etc.). When the unit of

measure differs from the unit of issue, the lowest unit of issue that

will satisfy the required units of measure will be requisitioned.

C-5