TM 5-6350-275-24&P
a.
Removal
(1) Press main power push button (1) to remove internal power to processor assembly and disconnect ac power cord
(5) from power source.
(2)
Remove cluster cable(s) (7) and/or terminator block from cluster connector jacks (4).
(3) Remove printer serial interface cable (6) from connector (3) and remove monitor cable (2) from graphics card
connector.
(4) Remove ribbon cable from parallel connector (12)
b.
Installation
(1)
To connect Tape Streamer and DCX modules refer to paragraph 3-11 and 3-12.
(2) Connect printer serial interface cable (6) to connector (3) and reconnect monitor cable (2) to graphics card
connector.
(3) Connect cluster cable(s) (7) and/or termination block to cluster connector jacks (4).
(4) Connect ribbon cable to parallel connector (12).
(5) Connect ac power cord (5) to power source.
(6) Press main power push button (1) to apply internal power to processor assembly.
(7) Operation System (OS) and Application must be reloaded; notify System Administrator.
3-79