|
|
TM 11-7010-201-12/ET821-AA-OMI-010/E154 MTS/TO 31S5-2TSQ73-1
5-12. FAULT ISOLATION PROCEDURE.
(Cont.)
c. Isolating Malfunctions.
Isolate the malfunction to a defective LRU (Least
Replaceable Unit).
ZUse the MTS FI Flow Chart.
NOTE
All procedures referred to by the FI
These tables are found at the end of
Flow Chart are indicated by an *
the FI Flow Chart.
followed by their paragraph number
The MTS FI Flow Chart includes
in this manual.
troubleshooting data for card types
The five tables used with the FI Flow
used in other systems because the
Chart are referred to by boxed
MTS is internally programmed to test
numbers: for example, Table
these cards. The programmed data
for all MTS-testable cards is checked
during self-test.
5-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |