|
|
TM 11-6625-646-15
An AIRSPEED indicator, calibrated in knots, indicates
Table 1-1. Equipment Supplied - Continued
the air pressure applied to the SAS amplifier airspeed
Quantity
Item description
Part number
sensor. A DIFF PRESS REG valve controls the amount
1
Crimping tool ........................ MS3191-1
and direction of differential air pressure. A DIFF
4
Hose assemblies .................. AN6270-4-42
PRESSURE indicator, calibrated in inches of water,
1
Operating instructions ........... SSE-500-3
indicates the amount and direction of the differential
4
Quick-disconnect couplings .. A02VS311-2
pressure applied to the SAS amplifier sideslip sensor.
1
Adapter assembly (P/O test ... 114V3058-1
set 114E5987-8).
Table 1-1. Equipment Supplied
Quantity
Item description
Part number
1
SAS bench test set .........114E5987-4,-8
ROLL GYRO SIMULATOR switch and a GAIN
1
Bag assembly .................A02VS301-1
SWITCH.
The ROLL GYRO SIMULATOR switch
1
Cable assembly ..............A02VS309-1
provides a signal simulating the helicopter vertical gyro
1
Cable assembly ..............A02VS309-2
roll signal. The GAIN SWITCH controls the pitch
1
Cable assembly ..............A02VS309-3
channel gain relay, simulating the landing gear switch.
1
Contact insertion tool ......11-6782
1
Contact positioner ...........11-7771-5
1-11. The physical dimensions and weight of the test
1
Contact positioner ...........11-7771-6
set are as follows:
1
Contact removal kit .........11-6900
a. .. Length ..................................... 17.75 inches
b. .. Height ...................................... 12.83 inches
Change 4
2.1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |