Signal Paths (Operator's PMCS chart) of CIRCUIT SELECTOR Switches

11-6625-467-34

given in table 2-8 below. Only the switch wafers

2-20. Signal Paths (Operator's PMCS chart)

that perform a specific function for the test being

of CIRCUIT SELECTOR Switches

performed are listed. The TEST NAME columns

The operator's PMCS chart in TM 11-6625-467-12

show the setting and function of each switch wafer.

specifies various selfchecks for the test set. Func-

T h e RF JUMPER CABLE column describes the

tional tests in the operator's PMCS chart test the

function of RF jumper cables connected as part of

eight oscillator circuits and the distortion detector.

the test. If additional information for any other CIR-

The CIRCUIT SELECTOR switch settings for these

CUIT SELECTOR switch setting is needed, refer

tests and the function of each CIRCUIT SELECTOR

switch wafer for each self-test switch program are

2-51