BATTERY CHARGER POWER CABLE REPLACEMENT.

TM 11-6625-2976-40

2 - 4 1 . BATTERY CHARGER POWER CABLE REPLACEMENT.

MATERIALS/PARTS: Cable assembly, power (P/N 062-6219752CP353)

PRELIMINARY PROCEDURE: Remove battery charger cover (para 2-37).

REMOVAL

1. Remove four screws (1), Iockwashers (2), and move circuit board A1 (3) to side.

2. Unsolder tan wire (4) from standoff (5), black wire (6) from fuse holder (7), and green wire

(8) from ground lug (9).

3. Push strain relief bushing (10) off cable (11) from inside of chassis.

4. Remove cable (11).

INSTALLATION

1. Prepare cable as shown in detail A.

2. Push prepared end of cable (11) into chassis.

3. Solder green wire (8) to ground lug (9), black wire (6) to fuse holder (7), and tan wire (4) to

standoff (5).

4. Position strain relief bushing (10) on cable (11) near chassis wall and push into place.

5. Position circuit board A1 (3) on standoffs and install four screws (1) and Iockwashers (2).

FOLLOW-ON MAINTENANCE: Install battery charger cover (para 2-37).

2-85